CruzPro UWSD10 provides wind and temperature data readings via NMEA 0183, using 4 ultrasonic sensors, configured on a three-dimensional matrix, to provide these data with high accuracy and free from errors resulting from boat heeling.The project was born in collaboration with the sailing department of the University of Auckland, which has also made available its own wind tunnel, essential to achieve the highest standards of precision.
This sensor is then used to be connected to wind data reading units (such as the WSD-110) and then provide the wind speed with a resolution of 0.01 knots, the direction with a resolution of 1 degree and the air temperature with a resolution of 1 degree.
The CruzPro UWSD10 absorbs only 30mA, has a diameter of 140 mm, and a height of 260 mm including 150 mm of the mounting bracket. It comes complete with 30 m cable and two waterproof connectors.
CruzPro UWSD10 Wind sensor speed/direction878,00€Weight: 2 kg; Dimensions: 25 x 25 x 40 cm
Complete with 30 m cable and two waterproof connectors.
Accessory Compatible With
Nav-Station M5C - without transducer598,00€
Nav-Station M7C - without transducer988,00€
Nav-Station 5" (built-in GPS)472,00€
Nav-Station 6" Suncolor (integrated GPS)744,00€
Nav-Station 11" Suncolor Vcam (external GPS)2.330,00€
Nav-Station 11" Panorama (external GPS)2.123,00€
Seiwa SW501i (Integrated GPS)399,00€
Seiwa SW501ci without transducer (GPS int.)459,00€
Seiwa SW701i (Integrated GPS)1.049,00€
Seiwa SW701ci without transducer (GPS int.)683,00€
Seiwa SW1101 (External GPS)1.903,00€
Seiwa Seawave SD 12.2" SVGA (without GPS)2.001,00€
Seiwa Marlin 15" XVGA (External GPS Included)1.952,00€
Seiwa Explorer Cube (Controller without GPS)769,00€
CruzPro RP110 Intelligent NMEA Repeater465,00€
CruzPro WSD-110 - Wind399,00€
CruzPro MaxRp110, NMEA C repeater\\SW500,00€