Ideal for installations on flat surfaces, such as the boat's control surface or the car's dashboard. The base has 7 holes at various distances to facilitate the adaptation, also thanks to the coupling ball, the support RAM-MOUNT can be oriented both vertically and horizontally, which in addition to a very high resistance, also ensures the absorption of vibration. The rounded and elegant fixing base of the instrument has various holes at different distances so that it can be adapted to different products such as:
Piranha: MAX 10, MAX 15, MAX 10
Cuda: 128, 168, 240i, 240, 250 S/Map
FishEasy: 240, 245 DS, 320, 320C
M68C S/Map, M68i S/Map, M56 S/Map, M56i S/Map, M52i S/GPS, X67C, X47EX, X47
It can also be adapted to the series of Nav-Station plotters and many other instruments that can be fixed on a 63 mm diameter base.
The product is made entirely of steel painted with special paints for particularly resistant and indelible boats.
- Longest side length 8 cm
- Minor side length 7 cm
- Horizontal hole distance 4.5 cm
- Hole distance vertical 2.5 cm
- Ball diameter 2,5 cm
- Arm height 9,5 cm
- Weight supported 2 kg
RAM-B-107-1 Kit for Various Brand Models81,00€Weight: 0.4 kg; Dimensions: 30 x 14.5 x 6.5 cm
The correct placement of instruments on the bridge is a recurring problem. Often, in fact, we have limited spaces where it is difficult to place an instrument, without giving visibility to another. Or you may not be able to give the right angle to the display towards the pilot. Or removing the instrument is not easy.
These and other problems are completely solved by RAM supports!
They are made of the best metal alloys and entirely produced in the USA, in order to guarantee an unlimited duration over time. The clamping is immediate and safe by means of a knob that tightens the balls at the end, thus fixing the support in the desired inclination.