CruzPro CC30 charge controller: for 20A solar panels
Charge controller for solar panels and wind generators up to 20 A, CruzPro CC30, recharge voltage regulation, output for external alarm.
Description
The CruzPro CC-30 is a compact 20A automatic charge controller. Regulates the charging of batteries from external sources such as solar panels or wind turbines. Allows you to keep these useful accessories permanently connected to the on-board system without damaging the battery. The user will be sure to have the batteries charged whenever he needs them. The 3 LEDs on the front panel indicate the status of the regulator: whether charging, holding or no charging).
The minimum and maximum voltage is factory set from 13.1 to 14.4 VDC. These voltage values can be varied by the user from 11.5 to 14.35 Vdc (Minimum Limit) and from 13.5 to 16.5 Vdc (Maximum Limit) to better suit acid, gel or NiCd batteries. The accuracy is +/- 0.05 Vdc and has an efficiency of 99.9% at 20 A. It is also equipped with a user-adjustable overload LED and an external alarm output.
Technical characteristics
- Power supply voltage: 9.5 to 21 Vdc (20A Max)
- Absorption: 0.012 Amps nominal
- Operating Temperature: 0 °C to 50 °C (32 °F to 122 °F)
- Alarm: LED signaling and output for external alarm
- Dimensions: 100 x 60 x 30 mm
Prices
114-8030
CruzPro CC30 - Charge Regulator 20 A.
268,00€Weight: 0.1 kg; Dimensions: 22 x 10 x 4 cm
Series
A series of original and useful tools contained in a box that is also suitable for installation in the engine room.